I’ve been having a busy time in general recently, but I’ve finally got back to making things. I’ve been meaning to play with enamelling for a while. I ordered some WG Ball transparent enamelling powders (clear+red+blue) a while back to play with. The firing process is pretty quick: 800-810C for about 3 minutes. Of course,Continue reading “Enamelling Experiments”
Category Archives: Jewelry Kiln
Useful Kiln Tools + Beeper Upgrade
Kiln Beeper I installed a mini beeper in my kiln and adjusted the software to beep letters in Morse code depending on the stage of the program. I just used the same transistor+resistor+5v supply design as for the SSD control line to prevent damage to the pi. Kiln Tools Roll of cake making acetate: useContinue reading “Useful Kiln Tools + Beeper Upgrade”
Upgrading my Jewellery Kiln
I have a small “Prometheus Pro-1 PRG” Jewellery kiln for experimentation and artwork. Its a programmable kiln, which allows you to have programmes with multiple cycles of heating and cooling over time, which is essential for glass fusing. However, the user interface leaves something to be desired: At the bottom you’ll see there’s a 4Continue reading “Upgrading my Jewellery Kiln”
adq 